Touch System MK-1 (Tablet) Revisit 2

[Entry]

After countless hours of hair-pulling and all the troubleshooting it turn out that the touch panel I had on the Tablet has manufacture defect, as result of that, one of the micro-wire that is embedded in the film, I replaced with another one, and guess what, it works perfect!

and I accidentally discovered how to create a feedback from this resistive panel, by applying another layer of 3M transparent film, now it has a static feedback!! and a shinning finish, also I updated the HDD to a Intel X-25M 160GB, and wow the performance sky rocketed! and also another 16GB Storage SSD on PCI-express.

Updated Specs2!

CPU:         Intel Core 2 Duo T9300
Screen:     Samsung 15.4 WSXGA 1680*1080 (Mat and Ultra High Resolution)
Ram:        2* 2GB OCZ PC-6400 DDR2
HDD:       Intel X25-M 160GB SATA2 SSD
HDD:       SuperTalent 16GB Mini-express SSD
VGA:        Nvidia Geforce 8400m GS (with Copper Mod)
DVD:        NEC/Sony 16X DVDRW
Wifi (1):    Intel 4965 abgn Mini-PCI-EX
Wifi (2):    BCM 49321 abgn Mini-PCI-EX
PAN:        Toshiba Bluetooth 2.2 EDR
Cam:        2.0 Mega Pixel
Others:     4 Wire 25 Points Resistive Touch Screen
                4D Motion Controller
                NEC USB 2.0 Hub
                Mod to Clock Generator to accept 1066Mhz or higher
OS:           Mac OS X Snow Leopard
                Windows 7 Ultimate
                Ubuntu 10.04

Upload pic later today

[/Entry]

Advertisements

Touch System MK-II (Hydra)

[Entry]

Total hours spent: 35-40 Hours

This project consist of ALL broken parts (e-waste)

1 X LG 17” Flatron LCD Monitor
—-(intermittent power cycle problem and can’t find signal)
1 X Acer Aspire 3040 Laptop base
—-(Water damage, wont power ON)
1 X Acer Aspire 5100 Laptop Webcam
1 X Lenovo 3000 1.3Mpixel Webcam
1 X AMD Turion X2 2.0Ghz
1 X Broadcom Bluetooth 2430 EDR2.0+
2 X Kingston 2GB PC-5400 SoDIMM
1 X Fuji 12mm Height 250GB 4200rpm Notebook SATA HDD
1 X Atheros AR5008 Mini-Pciexpress N card
1 X 15.4” Samsung 1280*800 LCD Panel
1 X 15.4” Resistive Touch Panel
1 X 17” Resistive Touch Panel
1 X NEC 8X DVDRW
2 X Serial Touch Controller
1 X Dlink 7 Ports USB Hub
1 X Microsoft MCE Remote with Receiver
1 X Dollar Store 3 Sockets Power Bar
2 X home made high gain Antenna
? X Scrap Aluminum Metal Sheets
? X Industrial Velcro Strips

 

What took the longest was fixing the Acer Laptop, in addition to 9 Hours of trying to figure out the internal signal; especially Acer did not follows the USB stander.

Stander USB Signal:
+VCC (Red)
-Data (White)
+Data (Green)
GND (Black)

Acer:
+Data (Brown)
+VCC (Black)
-Data (Orange)
GND (Red)

Also, Acer internal USB signal only providing +3.3V instead of +5V

 

The Acer Laptop provide 3 external USB Jack, while ATI RS480+SB400 provides 8 USB Connections: 4 root hubs (6x USB 2.0, 2x USB 1.0), so technically there are 5 spare USB from the chipset, and this is everything became complicated, on the mother board there are 2 “Acer headers” that i am able to determined to be USB signals:

1 header has GPIO pin and i am able to determine it is for the front Bluetooth switch, so that goes to Bluetooth, since the switch control the entire root hub, there is no point to connect other devices to this root hub, so 2x USB down (3 more to go)

1 header is near the front, and only provide 3.3V and 300mA, while the Acer 5100 webcam is indeed 3.3V but require 400mA-450mA, this took me few hours to figure it out, as it works intermit, and sometime just gives me unidentified device and sometimes unknown device. At the end i replaced with Lenovo 3000 1.3 Mpixel webcam. and steal the +5Vcc from some place else. 1x USB down (2 more to go)

the last 2 one is unused, the other one is connected to Microsoft MCE remote’s receiver.

also the Fuji HDD is not the stander 9.5mm height but 12mm height, which took some effort to get it working

 

 

Summary Specs:

Turion X2 TL-60 2.0Ghz dual core
4GB DDR2 PC5400
ATI Radeon X1150 256MB Hyper Memory
Fuji 250GB 4200rpm HDD
Dual touch display

100_3325 100_3328  100_3330
LCD Logic/power board with USB and power Webcam Acer Webcam Case with Lenovo GUTS
 100_3333 100_3334 100_3335
Webcam Finish Webcam Finish 2 Build Stage
100_3337 100_3338 100_3339
Build Stage 2 Build Stage 3 Touch System MK-II Vanta (Single Display)
100_3340 100_3341 100_3342
Touch System MK-II Vanta (Single Display) 2 Touch System MK-II Vanta (Single Display) 3 Touch System MK-II Vanta (Single Display) 4
100_3343 100_3344 100_3345
Touch System MK-II Hydra (Complete) Touch System MK-II Hydra (Complete) 2 Touch System MK-II Hydra (Complete) 3
100_3346    
Touch System MK-II Hydra (Complete) 4    

 

[/Entry]